WHYTE NOTATION

The Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth century following a December 1900 editorial in American Engineer and Railroad Journal.

The notation was adopted and remains in use in North America and the United Kingdom to describe the wheel arrangements of steam locomotives, but for modern locomotives, multiple units and trams it has been supplanted by the UIC system in Europe and by the AAR system (essentially a simplification of the UIC system) in North America. However, geared steam locomotives do not use the notation. They are classified by their model and their number of trucks.

Structure of the system

Basic form

The notation in its basic form counts the number of leading wheels, then the number of driving wheels, and finally the number of trailing wheels, numbers being separated by dashes. For example, a locomotive with two leading axles (four wheels) in front, then three driving axles (six wheels) and then one trailing axle (two wheels) is classified as a 4-6-2 locomotive, and is commonly known as a Pacific.

Denotion of other locomotives

Articulated locomotives

For articulated locomotives that have two wheelsets, such as Garratts, which are effectively two locomotives joined by a common boiler, each wheelset is denoted separately, with a plus sign (+) between them. Thus a 4-6-2-type Garratt is a 4-6-2+2-6-4. For Garratt locomotives, the plus sign is used even when there are no intermediate unpowered wheels, e.g. the LMS Garratt 2-6-0+0-6-2. This is because the two engine units are more than just power bogies. They are complete engines, carrying fuel and water tanks. The plus sign represents the bridge (carrying the boiler) that links the two engines.

Simpler articulated types, such as Mallets, have a jointed frame under a common boiler where there are no unpowered wheels between the sets of powered wheels. Typically, the forward frame is free to swing, whereas the rear frame is rigid with the boiler. Thus, a Union Pacific Big Boy is a 4-8-8-4: four leading wheels, one group of eight driving wheels, another group of eight driving wheels, and then four trailing wheels. Sometimes articulated locomotives of this type are denoted with a “+” between each driving wheels set (so in the previous case, the Big Boy would be a 4-8+8-4). This may have been developed to distinguish articulated and duplex arrangements; duplex arrangements would get a “-“ being rigid and articulated locomotives would get a “+” being flexible. However, given all the wheel arrangements for duplex locomotives have been mutually exclusive to them, it is usually considered unnecessary and thus another “-“ is usually used.

Triplex locomotives, and any theoretical larger ones, simply expand on basic articulated locomotives, for example, 2-8-8-8-2. In the case of the Belgian quadruplex locomotive, the arrangement is listed as 0-6-2+2-4-2-4-2+2-6-0.

Duplex locomotives

For duplex locomotives, which have two sets of coupled driving wheels mounted rigidly on the same frame, the same method is used as for Mallet articulated locomotives – the number of leading wheels is placed first, followed by the leading set of driving wheels, followed by the trailing set of driving wheels, followed by the trailing wheels, each number being separated by a hyphen.